|
 |
 |
|
Wood Blocks Glued: Veneer and especially plywood blocks glued are other expanding uses. Veneer is wood blocks glued cut into thin sheets, often used for baskets and boxes for fruit and vegetables or glued onto wood blocks glued for ornamental facing and for figures on fine furniture. Plywood blocks glued, consisting of three or more sheets of veneer glued together crosswise, is employed in the construction and repair of most houses, for such elements as subflooring, partitions, shelves, and walls. Another use is for concrete forms.
wood blocks glued fiber of low-grade wood blocks glueds and sawmill residues is manufactured into sheets of fiber-board, including Insulation board for ceilings, hardboard as on television cabinets, particle boards such as cores for veneer faces, and sandwich materials or lightweight cores for plywood blocks glued or hardboard in paneling.
If you lay rectangular or hexagonal blocks, you will need half-sizes for the perimeter. Some manufacturers produce half-size blocks, but you may have to cut others to fit, using a heavy hammer and bolster chisel. Measure the offcut, and score the line with the chisel using a straight-edged length of wood blocks glued as a guide. Then, resting the block on the length of wood blocks glued, chop sharply with the hammer and chisel to break along the line.
Lay all the whole blocks first, then cut and fit the ones for the edges.
A large area of paving blocks likely to receive considerable traffic should be bedded on mortar on a prepared foundation. Start to lay the blocks in one corner of the patio and work diagonally across the surface. This makes it easier to ensure that they are laid consistently flat. Place i/zin thick offcuts of wood blocks glued between the blocks as consistent joint spaces, or simply butt up the blocks for finer joints. As you work across the surface, kneel on a piece of board to distribute your weight. |
|
|
| |
|
|
|
|
