Home About Us Contact Us Site Map Links Library
 
 
 
Gardener Tips
Home Garden And Gardening
Flowers
Roses
Garden Accesories
Decorative Plants
Garden Design
Garden Planning
The Water Garden
Garden Topography
Sculpture
Containers For Garden
Designing Your Garden
Garden Construction
Drawing Up Your Plan
Cement Garden
Materials Of Garden
Patio Ornaments
Garden Path
Boundaries
Trees
Japanese Style Garden
Outdoor
Plants
Garden Walls
Garden Fences
Rhododendrons
Clematis
Garden Screens
Annuals
Biennials
Bulbs
Lilies
Water Garden
Garden Basket
Season
Techniques
Garden Tools
Cultivation
Protection
Home
New York
Country
Town Flowers
Garden Blocks
Herbs
Blue Roses
Red Roses
Scent Gardens
Large Gardens
Garden Fall
 
 

Unique Home Furniture, Home Decorating and Home Decoration Store

Final Color:

Final Color One usually starts with a container of white paint. It is usually advisa- ble to obtain the final colors first in a small quantity, as errors in mixing large quantities are sometimes costly. Pigments should be added slowly and tests of the color should constantly be made on a flat piece of cardboard or wood and these should be held in their final position on wall, ceiling, or elsewhere.

Suggestions for mixing paint colors. There are no scientific formulas for mixing pigments to produce other colors. One cannot state either what quantity, volume, or weight of paint to use to obtain a desired result. This is due to the fact that the chemical ingredients of certain pigments have stronger tinting values than others, so that relatively less of those pigments must be used in mixtures. The production of colors by pigment mixtures must be done by the trial and error method of visual examination. In trying to obtain a certain color by a paint mixture, the decorator is usually matching another color or producing axolor that will be suitable for some part of a room or one that will harmonize suitably with the other hues of a tentative color scheme. One usually starts with a container of white paint. It is usually advisable to obtain the final colors first in a small quantity, as errors in mixing large quantities are sometimes costly. Pigments should be added slowly and tests of the color should constantly be made on a flat piece of cardboard or wood and these should be held in their final position on wall, ceiling, or elsewhere.


The final finish may be of a type that gives a surface film, such as French polish, varnish, or polyurethane. The latter two are available in gloss, satin, and matte finishes. Varnish stains are also available. These are convenient, since they will color and finish the wood in a single operation. Do bear in mind that each extra coat of varnish stain will darken the color of the wood and, unless brushed out very evenly, the color will vary with the thickness of the film. When wood is stained with a penetrating dye, the color will not vary - no matter how many coats of clear finish you later apply.
 
 
  Home | About Us | Contact Us | Site Map | Links | Library